Skip to content

Making riser handling faster and safer

Incorporating hydraulics to riser handling

In contrast, our new tool’s hydraulic operation means riser handling can be much quicker: scaffolding does not need to be erected and the tool hydraulically locks itself on to the NT-2 joint in seconds. Crucially, because it is hydraulically actuated, the new tool can be operated remotely by means of a dedicated combined hydraulic power unit and reel, which reduces the risk of harm to personnel.

During the tool’s first real-world application, our client, a Norwegian drilling operator, used it to run and remotely pressure test three 6,019-psi (415bar) full-riser systems. The tool cut 4.5 hours of rig time from each run, decreased the project costs by $2.9 million and reduced the risks to safety.

We will now be offering the tool to all clients as part of our strategy of continuing improvements in efficiency and safety. The tool’s key features include its ability to perform a wellbore pressure test to 7,000 psi while holding the tension at 308 te (flanged and quick-connect systems are available to 12,200 psi) act as a contingency method for applying 400 te of tension to the drilling riser system before blowout preventer installation (with no internal bore pressure) interface with either a Grayloc 192 or 196 gasket seal profiled, 18¾”, 15-M NT-2 pin by means of a removable adaptor housing the seal elements lift a drilling riser tension joint weighing up to 20 te and measuring up to 12 m. In addition, its vital safety features include visual indicator rods that show whether the tool is locked or unlocked, and a manual override feature to lock and unlock it.

The Claxton tool is 3.52 m long, has a maximum outside diameter of 1.16 m (45.¾”) it is wise to mention this in imperial as it connects with the rotary table) and weighs 5.1 te. It is DNV approved and is verified in accordance with DNV-OS-E101 and API 16F, 6A, 8C and 7G. It is supplied as a complete package with a DNV-2.7-1-certified container for transportation and storage, and a combined ATEX-approved hydraulic power unit and umbilical reel to power all functions.

Operational advantages

An important feature of the tool is that it offers protection for the NT-2 riser connector. This expensive piece of hardware is at risk of being damaged by the riser when it is moved by the crane. The key element of an NT-2 connection is the seal profile located at the top. When our new tool is installed on the NT-2 joint, this seal region cannot be accessed because the tool envelops it and prevents damage through mishandling or from dropped objects.

The new tool also helps to safeguard against weather window issues, as it can apply tension if sea conditions worsen during the installation process. In this situation, a manual tool could not operate to 400 te without a specially designed tool mandrel and, crucially, could not maintain tension while being highly pressurized. This is not an issue with the new tool because it has been specifically designed to meet these parameters.

We have also eliminated some of the operational use restrictions. For instance, the manual version requires over-the-side scaffolding work, which cannot be undertaken at night on some Rigs. The hydraulic riser-handling tool has no such operational restrictions and therefore does not impact on our clients’ decisions regarding when to run or pull the riser system during a drilling campaign.

The primary benefit of a slimline tension ring is not realized during running operations but in pulling operations

Slimline tension rings

The benefit of the slimline tension ring comes into effect when you are drilling more than one slot at a given time and you need to “hop” the riser from one slot to the next. This means that at some point you will pull the tension joint through the rotary table. By design, the slimline tension ring does not need to be removed to allow the tension joint to pass through the rotary and thus saves rig time. The tension joint can then of course be re-run through the rotary table making further time savings.

Further benefits can be realized from testing the joint using a previously installed Claxton slimline tension ring, which reduces the Texas deck exposure. Space and lifting constraints mean it can be time consuming to get a traditional tension ring onto the Texas deck for installation on an in situ riser. We recognised that if we could design around these issues and still maintain performance, our clients would save significant amounts of time.

A Claxton slimline tension ring can be taken from a half-height container directly onto the drill floor and attached to the riser. Then the riser and tension ring are run through the rotary table, which cuts the rig time required and so reduces costs for our clients.

Key takeaways

The new Claxton hydraulic riser-handling tool provides a means to fully support a drilling riser system during installation and recovery operations. It offers time and cost savings, and a range of safety and operational benefits, including remote circulation and full pressure testing of the drilling riser, no scaffolding requirements and protection of the associated riser connector.


Contact us and we will put you in touch with the person best placed in our team to answer based on your unique enquiry. Our engineers are specialists in their own fields and ready to take on any challenge!

Riser buyers guide Riser buyers guide
E-book download
Drilling Riser Buyers Guide

Discover how we have shaped a turnkey service that has already helped hundreds of operators and projects around the world achieve their desired outcomes.

Risers & tensioning case study pack Risers & tensioning case study pack
E-book download
Drilling Riser and Tensioning Case Study Pack

Download the Claxton drilling riser and tensioning case study pack to discover how we have saved clients time and money through innovation.